|
Range of Pipes
Ductile Iron Spun Pipes are produced in both as per Thickness Class (like, K9, K7 etc) and Pressure Class (Like C25, C30, C40 etc). The Standard Products are listed below.
| Size (DN) mm |
Preferred Pressure Class |
Thickness Class |
Outside Coating |
Inside Lining |
| 80 |
C40 |
K7, K9 |
Depending on Soil Aggressivity, the following coatings are available:
- Metallic Zinc Coating of 130gm/m2 or 150gm/m2 / 200gm/m2 or 400gm/m2
OR
Zinc Alloy Coating of 200gm/m2 or 400gm/m2.
WITH A FINISHING LAYER OF
Black/Pigmented Bituminous Coating
OR
Epoxy Coating of different Colors
- Polyurethane Coating
|
Depending on Water Aggressivity, the following Linings are available:
-
Cement Lining varies from Ordinary Portland Cement, Sulphate Resistance Cement, High Alumina Cement etc., with or without Seal Coat
-
Ceramic Epoxy Lining
-
Polyurethane Lining.
|
| 100 |
C40 |
| 125 |
C40 |
| 150 |
C40 |
| 200 |
C40 |
| 250 |
C40 |
| 300 |
C40 |
| 400 |
C30 |
| 450 |
C30 |
K7, K9 |
| 500 |
C30 |
| 600 |
C30 |
| 700 |
C25 |
| 750 |
C25 |
| 800 |
C25 |
| 900 |
C25 |
| 1000 |
C25 |
| A. |
Ductile Iron Socket and Spigot Pipe with Push-On Joint from DN 80 to DN 1000 with Rubber Gasket conforming to IS 8329/ ISO 2531/ EN 545/ EN598 for Drinking Water and sewerage. Ductile Iron pipes are available in the following Joints |
 |
|
- Push-on
- Push On (Restrained)
|
| B. |
Ductile Iron Flanged Pipe from DN 80 to DN 1000 conforming to IS 8329/ ISO 2531/ EN 545. Flanged Pipes are available |
 |
|
- As cast (Small Barrel lengths)
- Welded on
- Screwed on
|
|
