Ductile Iron Fittings manufactured by Electrosteel.

Electrosteel

Products & Services

Electrosteel Castings manufactures Ductile Iron Push-on Joint Socket Fittings which conform to Product standards: BS-EN-545: 1995 / ISO-2531:1998 / IS-9523: 2000. We also manufacture D.I. Fittings which are suitable for both Mechanical Joint and Pushon Joint conforming to BSEN: 545/1995 and IS:9523/2000.The fittings are made in a state of the art plant at Khardah (West Bengal). the fittings are made with the most modern casting technique known as ‘Vacuum Lost Foam Process.’

Some Fabricated Fittings are also available from us.

Our product portfolio includes the following fittings:

Jointing System

Products

	Socket & Spigot Push-on-joints
	These fittings are available with Mechanical Joint Sockets as well.

	11.25⁰ Double Socket Bend.
	22.5⁰ Double Socket Bend.
	45⁰ Double Socket Bend.
	90⁰ Double Socket Bend.
	90⁰ Double Socket Duckfoot Bend.
	All Socket Tee (alternatively Flanged on Double Socket Tees)
	Double Socket Concentric Tapers

Mechanical Flexible Joints

	Flanged Socket (Mechanical Joint)
	Mechanical Joint 22⁰ 30’ & 11⁰ 15’ Bend.
	Mechanical Joint Taper.
	Mechanical Joint Tees
	Mechanical Joint Collars

Flanged Joints

	90 ⁰ Double Flanged Bend
	45 ⁰ Double Flanged Bend
	90⁰ Double Flanged Duckfoot Bend
	All Flanged Tee
	Blank Flanges
	Double Flanged Concentric Tapers
	Flanged Spigot

Ductile Iron fittings without branches conform to class-K12. Ductile Iron fittings with branches conform to class-K14. For calculating thickness e= K(0.5 + 0.00IDN).

Allowable pressures for Ductile Iron Socket joint Fittings: For socket fittings, except tees internal pressure ratings (PFA,PMA & PEA) are equal to that of class K9 pipes see table given under class K9 pipes. For Socket tees internal pressure ratings (PFA, PMA & PEA) are less than that of class K9 pipes. Buyers are requested to contact ECL for exact values on type of anchorage to be provided at the site.

Quality Control

Electrosteel Castings Limited is manufacturing DI All Socketted Fittings conforming to BSEN:545/2002 and IS:9523/2000. All DI fittings are tested at works at the following test pressure as specified in BSEN:545/2002 and IS:9523. The fittings, which are thicker than the pipes, can also take higher pressures than the pipe, but are tested at the works at a much lower pressure as per international norms. The works test pressure of fittings is sufficient to detect any casting defects. Periodically type tests are done at the works to pressure more than the test pressure of pipes.